Aluminum bar grating is a good choice when lightweight, corrosion resistant material is desired. Aluminum bar grating comes in many options such as: rectangular bar, I-bar, flush top, riveted. Bearing bar sizes range from 1" x 1/8" through 2-1/2" x 3/16" in 1/4" depth increments. Bearing bar spacing of 7/16" through 1-3/16" with cross bars available at 2" or 4" centers. Where skid resistance is desired, a serrated surface can be provided on rectangular bar grating.
Aluminum Bar Grating surface treatment:
Surface coating: Generally, powder electrostatic spraying or polyester paint spraying is also available. Roll coating and brushed surface treatment are also available. Common colors are milky white, black, and other colors can be customized according to requirements. Different color combinations can express different personality characteristics.
Aluminum Bar Grating suitable for:
Applicable places: Grille ceiling ceiling system is widely used in high-grade office buildings, corridors, airports, stations, clubs, banks, shopping malls, exhibition halls, bars, large shopping malls, etc.
Aluminum Bar Grating product features:
The main and auxiliary bones are vertically and horizontally distributed, have a strong spatial sense, have distinct layers, strong three-dimensional sense, novel shape, fireproof and moistureproof, and good ventilation. Folded aluminum alloy U-shaped strips, combined into a hanging grid for supporting the inner square block
Aluminum Bar Grating processing technology:
Aluminum grille product performance:
Fireproof, moistureproof and well ventilated
Aluminum grille installation structure:
Aluminum Bar Grating Installation Notes:
1 Install the trimming angle according to the same level.
2 According to the modulus of the grid specification, the distribution boom and the distance between the booms are generally 1-1.2 meters.
3 Attach the grille hook to the spring piece. Then the sleeve is hung on the boom.
4 The main and auxiliary keels of the grille are staggered. Pre-assembled on the ground to form a unit.
5 Hang the hook on the boom in the hole of the main bone of the grille. Connect the unit to the unit with its own grille. After it is completely installed, adjust the grille ceiling to the required level.